Chapter 75 Why are you here again?

Chapter 75 Why are you here again?
The chief engineer was delighted: "What do you say? We should bring him here. Xiaolin's classmate must also be an automation expert. He can be used here. Besides, it seems that this person is very capable and has a wide range of interests."

Engineer Lu waved his hand and said, "Don't even think about it. If you like someone just by listening to his deeds, will they value him as much as you do? They will definitely keep him a secret. I don't know if the 17th Ministry of Machinery is anxious or not, but their factory is definitely as anxious as you are."

The chief engineer thought about it and said, "Haha, that's right. It's okay. We can borrow the chicken to lay eggs. Let Xiaolin look for him more often. Give him the credit he deserves. I think it shouldn't be a big problem. Apart from anything else, we can ask him for advice on the engine casing. He is the inventor of the material. Hahaha."

Gao Zhendong didn't know that the two old comrades here were thinking of taking advantage of him. If he knew, he would definitely say, come and take advantage of him, quickly.

Now he is speeding up the completion of his book on project management system. After finishing it, he will first proofread it for typos for Liang, Fang and Liu, and mark the questionable places.

After they have modified what they have found, they will hand it over to Lao Chen to check, mainly to see if there is any inappropriate content. In this regard, Lao Chen is more perceptive than him.

When it was almost time to get off work, Gao Zhendong breathed a sigh of relief. He had finally finished it. This was the first time in his two lifetimes that he had written a monograph. He was quite excited.

Although he did not participate in the work in his previous life, he had read the requirements for professional title evaluation. Monographs are hard achievements. Although he has no shortage of achievements now, the sense of accomplishment is the same.

After the first time, will there be fewer times later?

After calming down and calming his excitement, Gao Zhendong called several other people in the office to divide the manuscript into three parts. Each of them proofread a part, and then exchanged them. After completing a single cycle, he could make revisions.

The three people were overjoyed. They were ready to proofread the document with an attitude of respect. Moreover, by proofreading it, they would get the opportunity to participate in the editing. They knew how thoughtful Gao Zhendong was.

After giving instructions, Gao Zhendong packed up and left the office as it was time to get off work.

I rode my bike past the factory bulletin board and saw some people reading notices from the factory, and I could hear a faint sound of discussion.

"Gao Zhendong has been appointed as deputy section chief again. This is really fast."

"Deputy Section Chief, the salary is so high."

"It's nothing to him. The salary of a level 8 engineer is to yuan higher than that of a deputy section chief."

"Twenty or thirty? My salary is less than 30."

"For him, the deputy section level is more important. Even a lower level is still considered a cadre. He is playing both sides."

"."

Gao Zhendong continued to ride his bike out of the factory. At the factory gate, a team of CA10 Liberation trucks were mixed in with the group of workers going off work, rumbling away into the distance. On the backs of the first and last trucks, soldiers holding steel guns sat in them, their bright eyes looking around vigilantly. Above the front of the trucks, the muzzles of Flight 56 ​​were faintly visible.

The first batch of 3Z-591 began to rush towards their battlefield, which made Gao Zhendong even happier.

He decided to treat himself and rode his bike to a state-owned restaurant on the way home. He wanted to order two dishes and have a good meal.

When I entered the restaurant, I saw there were no meat dishes. Maybe it was because we arrived late.

Gao Zhendong turned around and went to the non-staple food station, but there was no meat left, and not many other things either. This was normal, as it was a bit difficult to buy meat at this time these days.

Gao Zhendong thought to himself that he was unlucky and simply went home.

After returning home, Gao Zhendong prepared some pre-prepared dishes, heated them up, and drank them happily until the evening while listening to the gramophone.

Relax tonight. He has been working non-stop for the past month and is actually a little tired. Taking advantage of the good mood of finishing the manuscript, Gao Zhendong decided not to do anything tonight. In the dark corner outside the south room, a figure was hiding there. He listened for a long time, but didn't hear any sound, so he left in disappointment.
-
Saturday afternoon, Chief Engineer Chen’s office.

Gao Zhendong took a stack of manuscripts and handed them to Lao Chen: "Master, the book on the project management system has been written. I asked Liang Faming and the other three to proofread it. This is the manuscript I have revised after proofreading. Please give me some corrections."

Lao Chen was very happy and took the manuscript: "Haha, you've finished writing? Then I have to read my apprentice's masterpiece."

I took the manuscript and found that in addition to the six words "Project Management System" on the cover, there was a line of small words below - "Editor-in-Chief: Chen Heming Gao Zhendong".

When Old Chen saw this, he tore off the cover with a "sizzle", crumpled it up a few times, and threw it into the trash can.

Gao Zhendong was unable to stop him: "Master, what are you doing?"

Old Chen shook his head: "You respect your teacher, I understand, I received your intention, but this is not appropriate, I am not the editor-in-chief of this book."

Gao Zhendong sighed: "You were just about to give me some advice, why don't you just let it go?"

Lao Chen laughed: "Haha, I will definitely give my opinions, but I definitely can't be considered the editor-in-chief. If you put my name there, I can't get past my own test. Just put me in the front of the co-editor. That's it, no more to say. Leave the book with me and I'll take a look at it as soon as possible, and I'll give you my opinions later."

It can be seen that although Lao Chen was unwilling to give up his apprenticeship due to his own sense of morality, he was still very happy with his apprentice's kindness.

As a result, before getting off work, he saw Lin Lianwei again. Comrade, is he very idle recently?

As soon as Lin Lianwei entered the room and saw Gao Zhendong there, a huge stone fell from his heart.

These days, finding someone depends on luck. Without a mobile phone, making a phone call is not convenient, so you can only try your luck when you get to the place. If the person is not there, you can only leave a message.

When Gao Zhendong saw Lin Lianwei, he thought he had some problem again, but he was not a missile expert, and there seemed to be no reason for this guy to come here every day.

Gao Zhendong asked him to sit down: "Lian Wei, are you going to thank me? Haha"

Lin Lianwei looked ashamed: "Thanks are due. I will send you a thank you letter later. Hehe, but I have something serious to discuss with you today."

Seeing that it was something serious, Gao Zhendong stopped joking: "Oh? Go ahead."

Lin Lianwei thought for a while and said, "We have a material that has good other properties, but it feels a little heavy. You are in the materials business, do you have any ideas?"

As for materials, it seems reasonable for him to come to me to discuss it, since rolled steel plates are also considered materials.

But this question was still the same as last time, with no beginning or end. Gao Zhendong was a little used to this kind of riddle: "What material?"

"can not say."

This time it's even more excessive. As expected of someone who develops air-to-air missiles, what he said is purely air-to-air.

If we don’t know what material it is, then there is no way we can talk about the most commonly used methods used by steel rolling mills, such as improving quality and reducing quantity through heat treatment and ultimately achieving weight reduction.

(End of this chapter)